Permobil Hälsa Bed Owner’s Manual 5 – Install the platform
www.permobil.ca 27
5 – Install the platform
After the electrical systems have been connected and you have installed any optional side rails,
you can install the platform.
STEPS
1 - Retrieve the platform segments that you put aside earlier. Remove all remaining
packaging.
2 - Snap each of the 4 pieces into position on the bed frame. Note that the top sides of the
platform pieces are flat: any protrusions must go the underside. Simply apply hand
pressure to snap the pieces into place on the frame.
3 - Ensure that all platform pieces are securely in place.
FLIP SO THIS SIDE
IS UNDERNEATH
SNAP THE PLATFORM
PIECES INTO PLACE
To Next Page
Loading...
