Permobil Halsa - Move the bed into different positions

Permobil Hälsa Bed Owner’s Manual 6 – Install the headboard and footboard
www.permobil.ca 29
4 - Use the hand pendant to reposition the bed frame out of the way. Slide the footboard over
the footboard support so the side with pre-drilled holes faces in/away from the installer.
5 - Slide the headboard over the headboard support so the side with pre-drilled holes faces
in.
6 - Open the bag of screws. The bag contains 8 cap assemblies and 4 bumpers.
Each cap assembly includes a screw, a spacer, and a cap.
7 - Seat each screw into a spacer so the open side of the spacer is on the screw head side.
SIDES WITH
NO HOLES
FACE OUT
FOOTBOARD
HEADBOARD
OPEN SIDE
OF SPACER
SCREW
CAP
SPACER
CAP ASSEMBLY
BUMPER