Permobil K - Page 42

Owner’s Manual Permobil K/C300 Design and function, R-net
43
R-Net control panel LCD monochrome display
Speed Indicator
This displays the current speed setting.
The speed setting is adjusted using the Speed
Buttons.
Current Profile
The Profile Number describes wich Profile the con-
trol system is currently operating in. The Profile Text
is the name or description of the Profile the control
system is currently operating in.
In Focus
When the control system contains more then one
method of direct control, such as a secondary
Joystick Module or a Dual Attendant Module, then
the Module that has control of the wheelchair will
display the In Focus symbol.
Speed Limit
If the speed of the wheelchair is being limited; for
example, by a raised seat, then this symbol will be
displayed. If the wheelchair is being inhiited from
driving, then the symbol will flash.
Restart
When the control system requires a restart; for
example, after a module re-configuration, this sym-
bol will be flashed.