-33-
Owner´s manual Koala Design and Function
Fig.19. Seat lift
Leverman (Joystick manager)
With the help of the Leverman, you can use
the joystick to control the speed of the chair
(5 positions), and the seat lift.
Operating the Leverman
1. Switch the start button on the control
panel to ”on”.
2. Press the MODE button. The battery
indicator lights and the speed selector
lights flash. Step the speed range up or
down by moving the joystick right or left.
3. Press MODE to move through the
program. The right foot-plate lights.
4. Move the joystick to the right and the
seat lamp will come on. Moving the
joystick forwards or backwards will raise
or lower the height of the seat.
7. Press the MODE button again. The
program ends and the chair is ready to
drive.
To Next Page
