PREVENTIVE MAINTENANCE SCHEDULE PART 8: MAINTENANCE AND SERVICE
– 142 – Y53-6007 (R10/06)
Master Lubrication Index
Table 3 Lubricant Symbol Key
ATF Dextron III/Mercon approved Automatic Trans-
mission Fluid
BB Ball Bearing grease
CB Engine oil for mild to moderate requirements
CC/CD Engine oil for severe requirements (MIL-L-
2104B /MIL-L-45199B w/ 1.85% max. sulfated
ash content)
CD
Engine oil meeting API “Five engine test sequence”
CD50 SAE50W synthetic transmission fluid
CE Engine oil meeting severe duty service require-
ments for direct-injection turbocharged engines
CJ-4 Engine oil
CL Multipurpose chassis grease
C4 Type C4 transmission fluid (torque fluid)
EP Extreme Pressure Lubricant
GL Straight mineral gear lubricant
HD Hypoid Gear Oil, A.P.I. - GL-5, SAE 80W-90
HT High Temperature grease (Timken Spec. 0-616)
MP Multipurpose gear lubricant (MIL-L-2105B)
WB Wheel Bearing grease (Timken Spec. 0-610)
NOTE: The responsibility for meeting these spec-
ifications, the quality of the product, and its perfor-
mance in service rests with the lubricant supplier.
Table 3 Lubricant Symbol Key
To Next Page
Loading...
