PART 5: SEAT AND RESTRAINT SYSTEMS INSPECTION OF THE RESTRAINT SYSTEM
(R10/06) Y53-6007 – 65 –
ical places where the web will experience cutting or
abrasion. Cuts, fraying, or excessive wear would indi
-
cate the need for replacement of the seat belt system.
2. The D-loop web guide is the area where almost con-
stant movement of the seat belt webbing occurs
because of relative movement between the seat and
the cab.
3. Check the comfort feature for cracks or possible dam-
age and that it works properly.
4. Check the buckle and latch for proper operation and
to determine if the latch plate is worn, deformed, or
damaged.
.
To Next Page
Loading...
