PART 5: SEAT AND RESTRAINT SYSTEMS INSPECTION OF THE RESTRAINT SYSTEM
(R10/06) Y53-6007 – 67 –
the original components that were removed. This will
maintain the design integrity of the mounting points for the
seat belt assembly.
Once the need for replacement of the seat belt has been
determined, be certain that it is only replaced with the rec
-
ommended replacement seat belt. The occupant restraint
system has been developed and tested specifically for this
vehicle. If the vehicle was originally equipped with a lap
belt, it cannot be replaced with a three-point shoulder har
-
ness system, because the cab mounting points are not
structurally designed for a three-point seat belt.
To Next Page
Loading...
