Petsafe ST-100 - Page 12

12 www.petsafe.net
FR ENES
NL
IT
DE
Transmitter LED Indicator Light –
Function and Response
Button Button Function
Transmitter
Indicator
Light
Response
Tone (green) Delivers audible tone to
ReceiverCollar
Green LED on
for length of
button press
Stimulation
(yellow)
Delivers Static Stimulation to
Receiver Collar based on current
level shown on Digital Display
(Static Stimulation will time-out
if pressed continuously for 12
seconds or longer and will reset
after release)
Red LED on
for length of
buttonpress
Note: Red LED
will also  ash
3 times every
5 seconds
to indicate
lowbattery.
+2 Boost
(red)
Delivers Static Stimulation at 2
levels higher than the current
setting (can not exceed level
8 High and will also time-
out after button is held for 12
continuousseconds)
Red LED on
for length of
buttonpress
Tone and
Stimulation
Buttons held
simultaneously
Transmits Pairing command to
Receiver Collar when P is visible on
Digital Display
Orange LED
on for length of
button press