Petsafe ST-100 - Test Light Tool Instructions

www.petsafe.net 27
FREN
ES
NL
IT
DE
Test Light Tool Instructions
1. Turn the Receiver Collar on.
2. Hold the Test Light
Tool Contacts to
the Contact Points.
3. Press the Stimulation
Button on the
RemoteTransmitter.
4. The Test Light will
 ash. Note: At higher
Stimulation Levels,
the Test Light will
 ashbrighter.
5. Turn the Receiver
Collar off.
Save the Test Light Tool for future testing. Note: If the Test Light Tool
does not  ash, replace the Receiver Collar batteries and then re-test.
If Test Light Tool still does not  ash, contact the Customer Care Centre
or visit our website at www.petsafe.net.