Pfaff 130-6 - 5. To replace bobbin case; 6. To commence sewing

5.
To
replace
bobbln
caseo
(Fig.
7)
Slip bobbin into bobbin case,
and draw the thread
through
the
bobbin
case
slot 1,
away from
you,
under
tension
spring
2.
Turn
machine
back
on
its
hinges
expos-
ing base
for bobbin
case.
With bobbin
case
latch
opened,
between
thumb
and forefinger,
slip
bobbin
into
center
hook and
drop latch back.
Push down
bobbin case
with
thumb to make sure that case is lacked
in position.
Fig. 7
6. To commence Sewing
IMPORTANT-Turn
wheel towards you to pickup bobbin
thread.
Allow needle to descend and rise once. The under
thread
then appears in the form of a loop out of
the
needle hole.
Then lower presser foot
by means of presser foot
lever. Draw
both upper and lower thread ends under
the presser fot and to the rear.
1t