Pfaff 130-6 User Manual

26. Covered
cords
Covered cords
are made
with
the feed cover
plate
and
cord guide No.
41842, in
addition to
the cording
foot,
No. 41319
with five
grooves. All
of these are
available
at a slight extra cost.
Embroidery
yarn
No. 40, sewing
silk,
or standard
sew-
ing
cotton, may
be used
Crochet yarn
No. 3 or
5 can
serve
as cord.
Pass the
crochet yarn
through
the cording
guide, and
place the
fabric under
the presser
foot.
Sew the
cord on
the
line you
have traced,
with a
medium zigrzag
stitch.
Soft cording
effects can be obtained
by using a filler
thread.
This, (as shown
in Fig.
35), is done
with
smaller
zigzag stitches.
27. Ruffling
Ruffling is
done with
the same
type of
cording
men-
tioned
above.
(See Fig.
36).
Fasten
one end of
the filler thread,
and
tighten it after
completing
the seam.
The fabric
con now
be puckered
together
for uniform
ruffling. The
opposite
end of the
cord
must
be fixed,
to prevent
the ruffling
from
be-
coming
undone.
28.
Henstitching
(Fig.
37)
First draw
the threads
according
to the pattern,
just
as
if hemstitching
by hand.
The two
edges where
the
threads
have been
drawn must
now be
sewn with
narrow
zigzag
stitches,
using the regular
presser
foot. The
length
of stitch
depends
on the effect
you wish
to bbtain.
When
sewing the second
edge, make sure that
the same
threads
are
covered,
and that the
length of
stitch is
the
same as
on the
first edge,
to assure
a uniform
appearance.
For this
work an
embroidery
ring is very
useful.
32

Pfaff 130-6 Specifications

General

Brand	Pfaff
Model	130-6
Category	Sewing Machine
Language	English