11 - 52
Adjustment
11.09 Parameter settings
11.09.01 Selecting and changing parameters
● Simultaneously press and hold down the "PM" and "TE" keys and switch on the machine.
● Press the "
TETE
TETE
TE" key (LED on)
104
● Select the desired group, e.g. "700", by pressing +/- on the
"P" key"P" key
"P" key"P" key
"P" key.
726
● Activate the desired setting (e.g. counter for bobbin control) by pressing +/- on the "L" key.
● Save the input by pressing the "TE" key (LED off).
700
● Select the desired parameter, e.g. "726", by pressing +/- on the
"S" key"S" key
"S" key"S" key
"S" key.
To Next Page
Loading...
