Pfaff 360 User Manual

Threading the Needle
Insert a new No . 80 needle and place a spool of No. 50 thread on the spool
pin. The bobbin thread should be
one size smaller than the needle thread.
Then thread the needle os shown
in Fig. 35 above.
The
appearance of the finished seam depends on the correct relationship
between needle, thread
and fabric. To select the proper needle and thread
sizes, therefore,
consult the Needle and Thread Chart on page 18.
Figs. 36 & 37 Changing the needle plate
19

Pfaff 360 Specifications

General

Type	Mechanical
Free Arm	Yes
Presser Foot Pressure	Adjustable
Built-in Needle Threader	No
Stitch Functions	Straight stitch, zigzag stitch, decorative stitches
Needle Position	Adjustable
Stitch Width	Up to 5mm
Buttonhole Styles	4-step
Presser Feet	Buttonhole