Pfaff 360

It is recommended, about once every six months, to squirt ample cleaning fluid
into
all oilholes. Then raise the presser foot, unthread the needle, and run the
machine at high speed. After all dirt and gummed oil hove been washed out,
oil the machine and wipe it dry. This procedure will help preserve the smooth
running of the machine, and should be applied regardless whether the ma-
chine
is used regularly or not at all. Cleaning and lubricating the sewing hook
is
illustrated on page 41. See also the illustrations on page 84.
Fig. 61 Oiling points of lhe Pfaff 260 (top cover removed)
Fig.
62 Oiling po ints of the Pfaff 260·261 Automatic (top cover removed)
40