Pfaff 360 User Manual

Remedy
Check and adjust the stitch width setting as instructed on pages 67-69.
Type of Trouble
The patterns ore incomplete ,or irregular .
Caus e
Presumably the engaging levers hove not enough ploy or the pressure exerted
by the springs is insufficient to make them snap into the clutch studs properly.
Remedy
Increase the spring pressure by turning the regulating screws inwardly, as may
be required.
Fig. 113 Controls of the
Pfaff 260-261 Automatic
78

Pfaff 360 Specifications

General

Type	Mechanical
Free Arm	Yes
Presser Foot Pressure	Adjustable
Built-in Needle Threader	No
Stitch Functions	Straight stitch, zigzag stitch, decorative stitches
Needle Position	Adjustable
Stitch Width	Up to 5mm
Buttonhole Styles	4-step
Presser Feet	Buttonhole