40 PFAFF
44 Position of vibrating presser to lifting presser
Requirement: When the presser foot is raised by the lifting lever and the take-up is at the
top of its stroke, the teeth of top feed foot 1 (Fig. 1) must not protrude under
presser foot shoe 2.
Adjust on eccentric sleeve 3 (screw 4).
45 Pressure of vibrating- and lifting presser
Requirement: The pressure of the vibrating- and lifting pressers must be adapted to each
other so that perfect feeding is ensured, even at the highest sewing speed.
.1 Vibrating presser, basic adjustment: screw 5 (Fig. 2) flush with beginning of thread.
.2 Lifting presser, basic adjustment: screw 6 at a distance of 12 mm from needle head.
To Next Page
Loading...
Need help?
General
