Pfaff 3822-1/22 User Manual

24 PFAFF
27 Adjusting the floating foot
27.1 on 3822-1/24
27.1.1 Height adjustment
Requirement: With the gauge foot resting on the needle plate, srew 1 (fig. 2) must be in contact
with the stop.
.1 Lift floating foot (fig. 3) by means of hand lever 2.
.2 Unscrew floating foot.
.3 Screw on gauge foot (fig. 1).
.4 Bring down gauge foot by means of hand lever 2 so that it rests on needle plate.
.5 Turn screw 1 so that it touches the stop when gauge foot is resting on the needle plate.
.6 Unscrew gauge foot and screw on floating foot.
27.1.2 Distance screw
Requirement: Screw 3 (fig. 3) must be turned in to such an amount that the bottom part of
the floating foot (see arrow) touches the head of the screw only when the
presser foot is lifted by more than the sum of the feed dog height and the
workpiece thickness (approx. 0,5 mm).
Adjustment: Screw 3.
27. 2 on 3822-1/22
27.2.1 Height adjustment
Requirement: With the bottom feed dog positioned below the top edge of the needle plate
(fig. 4) there must be a spacing of 0.5 mm between stop 5 and guide 6.
Adjustment: Screw 1 (fig. 2).

Pfaff 3822-1/22 Specifications

General

Brand	Pfaff
Model	3822-1/22
Category	Sewing Machine
Language	English