3:4
Sewing
ambition™ 1.0
ambition™ 1.5
Elongation (3)
Elongation is used to lengthen satin stitches. The
entire stitch will be longer but the density will
remain the same.
For 1.5: Touch the center of the touch wheel.
The icon changes to show an elongation symbol.
Increase or decrease the elongation of the satin
stitch using “+” and “-”.
If elongation is not avaliable for the selected stitch,
a warning sound will be heard when touching the
center of the touch wheel, and the icon will not
change.
For 1.0: Press the “+” and “-” on the elongation
button to increase or decrease the elongation of the
satin stitch.
If elongation is not avalibale for the selected stitch,
a warning sound will be heard when pressing the
elongation button.
Thread tension (4)
Your machine will show the recommended thread
tension setting for the selected stitch. See page 2:7
on how to set and adjust the thread tension setting.
Mirroring
To mirror stitches or sequences side to side, press
mirror side to side (A). To mirror end to end, press
mirror end to end (B).
Note: Buttonholes cannot be mirrored.
3
4
3
ambition™ 1.5
A
B
ambition™ 1.0
AB
4
To Next Page
Loading...
Need help?
General
