Operating the machine
23
Stitch length adjustment button
With the stitch length adjustment button
(30) you can adjust the stitch length be-
tween 0 and 4 mm by turning the point
marking on the button to the required
length.
“Buttonhole” symbol
Between the numbers 0 and 1 you will
À nd the “buttonhole” symbol. This area is
the optimum stitch density for sewing but-
tonholes. The closer you turn the dial to 0,
the denser the stitch becomes.
Setting stretch stitches
(models 1032, 1042)
All of the stitches on the darker back-
ground are stretch stitches, i.e. they are
suitable for stretch fabrics. Turn the stitch
length adjustment button (30) to the
“stretch” symbol and select the desired
stitch with the stitch pattern adjustment
button (9).
To Next Page
Loading...
Need help?
General
