Utility stitches and practical sewing
37
• In order to sew the next buttonhole turn
the stitch pattern adjustment button
counter-clockwise until the “reverse”
symbol appears. Then return the stitch
pattern adjustment button to “A”.
• The machine is now ready to sew the
next buttonhole.
• Once you have completed sewing all
the buttonholes, push the buttonhole
lever (24) upward as far as it will go.
• By pulling the bobbin thread, bring the
needle thread to the underside of the
fabric. Tie off the threads.
• Remove the button from the button
holder.
Tip: In order to prevent damaging the
bartack by cutting open the buttonhole,
insert a pin into the bartack.
To Next Page
Loading...
Need help?
General
