Pfaff hobbylock 783 - Page 18

Finally, check that right loo-
per 1 does not touch the nee-
dle when you turn the hand
wheel anti-clockwise. The
clearance between looper and
needle must be 0.1 to 0.2 mm
(see Fig. 52).
Raise the presser foot and
check that the clearance
between right looper 1 and
chaining finger 7 is at least
0.3 mm (see Fig. 53).
Fig. 53
Fig. 52
1 7
Etsy seller: PFANTOM