Pfaff hobbylock 783 - Adjusting the Looper Thread Guides

20
17 Adjusting the looper thread
guides
Turn balance wheel in direc-
tion of arrow until needle bar
is at top dead centre.
Loosen screw 1 of looper
thread guide (Fig. 62).
Adjust looper thread guide as
shown in Fig. 62. After ad-
justment tighten screw 1.
Loosen screw 2 of right looper
guide (Fig. 62).
Adjust looper thread guide as
shown in Fig. 62.
After adjustment tighten screw
2.
1
Fig. 62
Etsy seller: PFANTOM