20
10. You will see your pattern box on the screen and we
need to select a pattern to place in the box. Go to home
and touch add pattern (see page 23 “Add Pattern”).
11. Open the JoAnn Hoffman and touch “scroll 1”.
12. The preview of the scroll 1 will appear to the right.
Under the preview, touch “Select Pattern”.
13. Your scroll 1 may be too small for your pattern
box, this is ok.
14. Touch the green light to the right of the magnify-
ing glass and your machine will trace through the pat-
tern
(see page 37 under “when running a pattern”).
15. Did you have any errors come up? If so, go to
page 24 and go through the trouble shooting steps. If
no errors go to step 16.
16. If no errors occurred, we now want to activate
stitching. Touch the needle with thread at the top right
of the screen. If it turns green you are ready to go.
17. Unthread your needle and run the pattern just as
you had before. Your pattern should run through ex-
actly the same as last time, but should be stitching now.
18. If no errors come up then your system is ready to
go, load different pattern boxes and become familiar
with how the system works before you put on an offi -
cial quilt.
Touch the green light to the
right of the sewing machine and
your machine will trace through
the pattern
To Next Page
Loading...
