34
Section 7: Editing
There are two ways to bring up the editing options when
you are ready to edit a pattern that has been added to
your pattern box:
One way is to touch the edit button along the top
row of buttons. The edit icon is the last icon to the right
The other way to edit a pattern that is on your screen,
hold your stylus over the top of your pattern for 3 sec-
onds. A green light will appear on the right hand side of
the screen, at that time release your stylus and a menu
will appear in the top right corner, this is the edit menu.
Next:
The pattern you have selected has a green box drawn
around it. If you have 2 patterns on the screen and you
wanted to modify pattern #2 (the pattern without the
green box around it), touch the “next” button and the
green box will move over to pattern #2.
Repeat:
Allows you the ability to repeat the selected pattern
across and down. Also able to add spacing in between
the patterns or have the patterns overlap by having a
negative spacing. NOTE: Once a pattern is repeated,
those repeats and the original become one pattern, not
several linked patterns.
Autofi ll:
This will automatically repeat and fi ll the pattern box. It
will ask if you want to keep pattern proportions; if you
say yes, the pattern will not stretch to fi ll the pattern box.
If you say no, the patterns will stretch to fi ll the pattern
box as much as it can. If you touch “Autofi ll” and noth-
ing happens, it is because the pattern already fi lls up as
much of the box as it can.
To Next Page
Loading...
