Need help?Do you have a question about the Pfeiffer Vacuum ThermoStar GSD 300 T3 and is the answer not in the manual?
General| Type | Quadrupole Mass Spectrometer |
|---|---|
| Sensitivity | 1E-11 mbar |
| Temperature Range | -20 to +70 °C |
| Mass Range | 1 to 300 amu |
| Detectable Gases | Variety of gases and vapors, depending on configuration and application |
| Applications | process monitoring |
| Pressure Range | 1E-11 to 1E-4 mbar |
| Output Signal | Analog and digital |
| Operating Temperature | -20 to +70 °C |
General safety guidelines, responsibilities, and operational precautions.
Guidelines for handling process gases and relevant safety regulations.
Steps for safely connecting the unit to the power supply.
Procedure for safely powering on the unit after installation.
Configuration steps for Balzers Quadstar™™ 422 system.
Steps to optimize ion source parameters for OmniStar™™.
Detailed steps for replacing the capillary on OmniStar and ThermoStar.
Instructions for replacing the orifice on OmniStar and ThermoStar.
To Next Page