Need help?Do you have a question about the Pfeiffer Vacuum TPR 265 and is the answer not in the manual?
General| Power supply | 24 V DC |
|---|---|
| Operating temperature | 0 to 50 °C |
| Protection class | IP 40 |
| Type | Pirani gauge |
| Output signal | 0 - 10 V |
| Process connection | DN 25 ISO-KF |
| Sensor type | Pirani |
Explains safety symbols like DANGER, WARNING, and Note for equipment operation.
Details requirements for skilled personnel operating the equipment.
Provides guidelines for safe handling and operation of the gauge.
Covers measurement principle, range, accuracy, and repeatability.
Details voltage range, measurement range, and signal characteristics.
Specifies voltage, power, fuse, electrical connection, and grounding.
Instructions for connecting the gauge to the vacuum system.
Details on how to connect the gauge electrically, including using controllers or other units.
Explains the Pirani principle and required stabilization time.
Discusses accuracy, calibration, and how gas type affects readings.
Procedure for adjusting the gauge due to calibration shifts.
Steps for cleaning the sensor, including materials and procedure.
Guide for common issues and their solutions.
Step-by-step guide for safely removing the gauge from the system.
Guidelines for returning the product for service or repair.
Procedures for safe and environmentally sound disposal of components.
Details the conversion formula and curves for signal-to-pressure.
Explains how gas type affects the measuring signal and provides calibration factors.
To Next Page