PFREUNDT WK60 Series - Perform weighings; Dynamic weighing process

To Next Page

To Previous Page

PFREUNDT GmbH | Operating Manual | WK60-RAD-BA-H-2022.01-EN

6. Perform weighings

6.1 Perform a weighing (dynamic)

1. Lower the liing arm and load the

bucket.

1.1 Raise the loading bucket com-

pletely.

2. Move the liing arm through the

weighing posion from below.

3. The fixed weight displays and is

added to the total.

4. Empty the loading bucket

as soon as you are asked

to do so in the display.

Main page of the scale aer you

empty the loading bucket (exam-

ple).

5. Continue weighing until the trans-

port vehicle is fully loaded or you

have reached the specified target

weight.

6. Finish the loading process, e.g.

by prinng out a weighing slip,

see chapter "7. Quit the loading

process".