PFREUNDT WK60 Series User Manual

14
www.pfreundt.de
6.2 Perform a weighing (stac)
For wheel loader scales, you can carry out stac weighings if necessary, depend-
ing on the conguraon.
Depending on the seng, the stac weighing can take place aer the liing
movement or aer lowering the liing arm.
1. Lower the liing arm and load the
bucket.
1.1 Raise the loading bucket com-
pletely.
STOP
2. Depending on the conguraon,
move the liing arm from below
or from above to any posion
within the weighing area and stop
briey.
3. The fixed weight displays and is
added to the total.
4. Empty the loading bucket
as soon as you are asked
to do so in the display.
5. Continue weighing until the trans-
port vehicle is fully loaded or you
have reached the specified target
weight.
6. Finish the loading process, e.g.
by prinng out a weighing slip,
see chapter "7. Quit the loading
process".

PFREUNDT WK60 Series Specifications

General

Brand	PFREUNDT
Model	WK60 Series
Category	Controller
Language	English