PFREUNDT WK60 Series - Forklift dynamic weighing

15
PFREUNDT GmbH | Operating Manual | WK60-RAD-BA-H-2022.01-EN
6.3 Weighing with forklis (dynamic)
1. Li the load with the
liing fork.
1.1 Then posion the mast
vercally.
2. Drive with the loaded liing fork
through the weighing posion
from below.
3. The fixed weight displays and is
added to the total.
4. Empty the liing fork as
soon as you are prompted
to do so on the display.
Main screen of the scale aer un-
loading the liing fork (example).
5. Continue weighing until the trans-
port vehicle is fully loaded or you
have reached the specified target
weight.
6. Finish the loading process, e.g.
by prinng out a weighing slip,
see chapter “7. Quit the loading
process”.