10
THE FUNCTION OF SWITCHES
1. MAIN SWITCH
1. OFF: All the power is cut off, the key can be
pulled out at this position.
2. ON: The power is ON, engine can be started,
the key can not be pulled out at this position
3. LOCK: The handle bar is locked at this
position.
4. “Push + turn counterclockwise”:
to open the seat.
5. When at position #1, “Push + turn clockwise”
to open the fuel cap.
6. For anti-thief purpose, push to close the core
of key set.
7. Press the key to get anti-thief key out.
8. Push the anti-thief key into position #8, then
the core of key set will open again.
1 2
5
3
6
4
7
8
To Next Page
Loading...
