PGO G-MAX - HANDLE-BAR CONTROLS; Beam, Signal, and Horn Controls; Headlight and Starter Button

21
HANDLE-BAR CONTROLS
1. HI/LO BEAM SWITCH
HI-The high beam is on
LO-The low beam is on
Press the lower part to make a passing signal.
2. Turn Signal Switch
Move to ← to signal a left turn, → to signal a
right turn.
Press to turn signal off.
3. Horn Button
When the horn button is pressed, the horn will
sound.
4. Parking Button
All signal lamps will twinkle to warn other people.
5. HEADLIGHT Switch
ON-Headlight, position light, taillight and meter
light will be on, when the engine is running.
6. STARTER BUTTON
The starter button is below the headlight switch .
When the starter button is pressed, the starter
motor cranks the engine.
1
2
3
4
5
6