Phanteks Eclipse P400A Series - User Manual

CLEARANCE
CPU Cooler Height 160mm
PSU Clearance 270mm
GPU Clearance 420mm
E-ATX Motherboard
360mm Front radiator
280mm Front radiator
272mm
130x420x115mm
145x325mm
REAR
120
FAN
120
RAD
TOP
120
FAN
140
FAN
140
FAN
140
RAD
FRONT
120
FAN
120
RAD
Solid
Breathing
Color Cycle
Short Press to change color:
Long Press to change mode:
Press and Hold to turn o or
switch to motherboard control.
COLO RS
2 SEC
MODE S
SOLID
BREATHING
RA DA R
SPARKL E
RAINBO W
PRESS AND HOLD THE MOD E BUT TON TO TURN O FF LEDS
English
1. Headphone
2. Microphone
3. USB 3.0
4. HDD LED
5. Power Button
6. Fan Control
7. Reset Button
8. RGB Control
9. D-RGB Mode
10. D-RGB Color
Francais
1. Casque
2. Microphone
3. USB 3.0
4. HDD LED
5. Bouton d’alimentation
6. Contrôle du ventilateur
7. Bouton de réinitialisation
8. RGB Contrôle
9. D-RGB Mode
10. D-RGB Couleur
Deutch
1. Kopfhörer
2. Mikrofon
3. USB 3.0
4. HDD LED
5. Ein-/Aus Schalter
6. Lüftersteurung
7. Reset-Knopf
8. RGB Steurung
9. D-RGB Modus
10. D-RGB Farbe
Espanol
1. Auricular
2. Micrófono
3. USB 3.0
4. HDD LED
5. Botón de encendido
6. Control del ventilador
7. Botón de reinicio
8. RGB Controlar
9. D-RGB Mode
10. D-RGB Color
Thank you for choosing Phanteks. Please take a moment
to carefully go through the manual. Phanteks will not
take responsibility for any damages incurred due to
incorrect installation or usage of this product.
This manual is applicable for the following products:
PH-EC400ATG
PH-EC400ATG_D
PH-EC416PTG
PH-EC416PSTG
ECLIPSE P400(S) FRONT I/OECLIPSE P400A FRONT I/O
RGB CONTROLS (P400(S) MODELS)Digital-RGB CONTROLS (P400A_D MODEL)
INTRODUCTION INCLUDED ACCESSORIES
Eclipse P400A / Eclipse 400(S)
120 mm Case Fan
(Pre-Installed)
2.5” SSD Bracket
(Pre-Installed)
2x Thumb Screw
4x PSU Screw
12x Fan Screw
1x This Manual
6x Zip Tie22x Motherboard
+ SSD Screw
1x Motherboard
Stando
PRODUCT OVERVIEW
LIGHTING CONTROLS
ECLIPSE P400A / P400(S)
INSTALLATION GUIDE V1.0
Press and Hold to turn o the case controller to sync
with the motherboard RGB or D-RGB software.
The 3-pin fan controller allows you to set any
connected fans to low, medium or full speed.
1. Headphone
2. Microphone
3. USB 3.0
5. Power Button
4. HDD LED
1. Headphone
2. Microphone
3. USB 3.0
5. Power Button
4. HDD LED
7. Reset Button
8. RGB Control
6. Fan Control
7. Reset Button
10. D-RGB Color
6. Fan Control
9. D-RGB Mode
P400S only
P400A_D onlyP400A_D only
P400A onlyP400A only
6. Reset Button
P400A_D only
*remove the mid-plate cover
CABLE CONNECTION
OPTIONAL UPGRADES
CONNECT TO DRGB LIGHTING PRODUCTS P400A_D MODEL
CONNECT TO RGB LIGHTING PRODUCTS P400S MODELS
VERTICAL GPU BRACKET
(PH-VGPUKT-02)
MODULAR HDD BRACKET
(PH-HDDKT_02)
CONNECT TO THE MOTHERBOARD
CONNECT TO THE POWER SUPPLY
RAINBOW
ADDRESSABLE ADDRESSABLE
MOTHERBOARD
D-RGB H EADER
To D-RGB Motherboard (optional)
Compatible with:
MOTHERBOARD
RGB H EADER
To RGB Motherboard (optional)*
12V G R B
12V
Compatible with:
SATA
CONNECT TO THE 3PIN FANS
To DIGITAL-RGB Products
To RGB Products
THE PHANTEKS VERTICAL GPU BRACKET CAN BE EASILY
INSTALLED IN THE REAR PCISLOT AREA WITHOUT
MODIFICATIONS. FOLLOW THE INSTRUCTION THAT COME
WITH THE VERTICAL GPU RACKET.
UP TO 4 ADDITIONAL HDD DRIVES CAN BE INSTALLED USING THE
MODULAR HDD BRACKET.
ECLIPSE P400A / P400(S)
INSTALLATION GUIDE V1.0
*P400S and P400A models only
To 3-PIN FAN
*Motherboard Adapter is sold separately (PH-CB_RGB4P)

Phanteks Eclipse P400A Series Specifications

General

Type	Mid Tower
Motherboard Support	ATX, Micro-ATX, Mini-ITX
Expansion Slots	7
Maximum GPU Length	420 mm
Maximum CPU Cooler Height	160 mm
Maximum PSU Length	220 mm
Rear Radiator Support	120mm
Color	Black, White
Dimensions	210 mm x 465 mm x 470 mm (W x H x D)
Material	Steel, Tempered Glass
Cooling Support	Front: 3 x 120mm or 2 x 140mm, Top: 2 x 120mm or 2 x 140mm, Rear: 1 x 120mm
Drive Bays	2 x 3.5" + 2 x 2.5"
Front I/O Ports	2 x USB 3.0, Microphone, Headphone, Power Button, Reset Button
Front Radiator Support	120mm, 140mm, 240mm, 280mm, 360mm
Top Radiator Support	120mm, 240mm

Summary

Cable Connections

D-RGB Lighting Products Connection

Connect D-RGB lighting products to the motherboard or directly to the case for P400A_D models.

RGB Lighting Products Connection

Connect RGB lighting products to the motherboard or directly to the case for P400(S) models.

Power Supply Connection

Connect the power supply unit to the case using SATA power.

3-Pin Fan Connection

Connect the 3-pin fans to the motherboard RGB header or case controller.

Optional Upgrades

Vertical GPU Bracket

Install the optional vertical GPU bracket without modifications to the rear PCI-slot area.

Modular HDD Bracket

Install the modular HDD bracket to add up to four additional HDD drives.

Lighting Controls

Digital-RGB Controls (P400 A_D)

Control D-RGB lighting modes and colors using physical buttons on the case.

RGB Controls (P400(S))

Change RGB colors and modes with short/long presses of case buttons.

Panel Removal and Hardware Installation

Side Panel Removal

Steps for removing the left side tempered glass and right side panels.

Front Panel Removal

Instructions on how to remove the front panel by pulling from below.

Motherboard Installation

Install the motherboard using nine motherboard screws.

Power Supply Installation

Install the power supply unit with four PSU screws.

SSD and HDD Installation

Install 2.5" SSDs and 3.5" HDDs into the provided tool-less trays.