Phanteks ECLIPSE P500A - User Manual

INSTALL:
4x
INSTALL:
2x
INSTALL:
4x
后部
顶部前面
PH-EC500ATG_BK (2x 140 mm Black Fans)
PH-EC500ATG_DBK (3x 140 mm D-RGB Fans)
PH-EC500ATG_DWT (3x 140 mm D-RGB Fans)
颜色
2 SEC
模式
常亮
呼吸
雷达
闪烁
彩虹
长按
模式键2S可以关闭灯光，再次按下可打开灯光
D
i
gital-RGB 控制器 (P500A_DRGB 版本)
介绍
感谢你选择Phanteks追风者，请花点时间仔细
阅读本手册。因不正确安装或者使用不当造成
的任何损害，Phanteks概不负责。
本手册支持以下型号：
所含配件
P500A配件包括
产品概述
间隙
ECLIPSE P500A
安装指引（英译）
OPTIONAL UPGRADES
ECLIPSE P500A
a. INSTALL 4X DUAL SYSTEM STAND-OFFS ON
THE BOTTOM SIDE OF THE ITX BRACKET
c. CONNECT THE POWER SWITCH & POWER LED
CONNECTOR TO THE MOTHERBOARD
e. INSTALL THE ITX BRACKET
WITH 4x ITX BRACKET SCREWS
d. REMOVE THE DUAL SYSTEM
COVER FROM THE CHASSIS
English
1. Headphone / Microphone
2. USB 3.0
3. USB-C Gen 2
4. D-RGB Color
(P500A-D only)
5. D-RGB Mode
(P500A-D Only)
6. Reset Button
(P500A Only)
7. Power Button
ECLIPSE P500A
黑色
ECLIPSE
P500A D-RGB版本
前I/O功能
a. INSTALL RISER CABLE WITH 2x
RISER CABLE SCREWS.
b. INSTALL VERTICAL GPU MOUNT
WITH 2x HEX SCREWS
B
A
B
A
f. (OPTIONAL) IF USING THE X16 RISER CABLE TO INSTALL A VERTICAL
GPU TO SECOND SYSTEM, MOVE THE VELCRO TIE FOR EASY
RISER CABLE ROUTING
STEP 9.
VERTICAL GPU MOUNT - OPTIONAL
STEP 10.
INSTALLING A DUAL SYSTEM - OPTIONAL
3x 140 mm 黑色 or
3x 140 mm D-RGB
3x 2.5” SSD 支架
(已预装)
2x 3.5” HDD 支架
LOOSEN:
2x
2
步骤 1.
移除面板
a. 打开左侧面板 , 向上提起，
可拆除面板
b. 松开两颗侧板螺丝往后拉，
可拆除右侧铁板
c. 扣住前面板底部往外拉，
可拆出前面板
(RISER CABLE SOLD SEPERATELY PH-CBRS_FL22)
(REQUIRES ITX UPGRADE KIT PH-ITXKT_R01 AND THE REVOLT X POWER SUPPLY PH-P1#00PS)
b. INSTALL ITX MOTHERBOARD
ON BRACKET USING INCLUDED
MOTHERBOARD SCREWS
INSTALL:
4x
120
风扇
140
风扇
120
水冷
140
水冷
1
2
3
4
1
2
3
6
5
77
120
风扇
140
风扇
120
水冷
140
水冷
120
风扇
140
风扇
120
水冷
140
水冷
风冷高度
190 mm
显卡间隙
435 mm
前冷排间隙
95 mm
顶部冷排间隙
65 mm
INSTALL:
2x
1
MOVE:
1x
1x
The GPU Mount has two
mounting positions. Position A
allows for better air cooling and
3-slot GPU cards.
(RISER CABLE SOLD SEPERATELY PH-CBRS_PR60)
REMOVE:
2x
12x 手拧螺丝
7x 电源螺丝
8x 风扇螺丝
6x 机箱螺丝 3x 显卡延长线
螺丝
4x 双系统
主板螺柱
8x HDD 螺丝
螺柱套筒
6x 扎带1x 竖装显卡支架1x 显卡防坠支架
22x 主板或
SSD 螺丝
1x 主板螺柱
备用
中文
1.
耳机/麦克风
2. USB 3.0
3. USB-C Gen 2
4.
D-RGB 颜色
(P500A-D only)
5.
D-RGB 模式
(P500A-D Only)
6.
重启
(P500A Only)
7.
电源

Phanteks ECLIPSE P500A Specifications

General

Form Factor	Mid Tower
Material	Steel, Tempered Glass
Expansion Slots	7
Maximum GPU Length	435 mm
Maximum CPU Cooler Height	190 mm
Motherboard Support	ATX, Micro-ATX, Mini-ITX, E-ATX
Dimensions	240 mm x 510 mm x 505 mm
Radiator Support	Front: Up to 360mm, Top: Up to 360/280mm, Rear: Up to 120mm
Drive Bays	2 x 3.5", 2 x 2.5"
Front I/O Ports	2 x USB 3.0, 1 x USB 3.1 Type-C
Included Fans	3 x 140mm D-RGB fans
Cooling Support	Front: 3 x 120mm / 3 x 140mm, Top: 3 x 120mm / 2 x 140mm, Rear: 1 x 120mm / 1 x 140mm

Summary

Optional Upgrades

Vertical GPU Mount Installation

Install vertical GPU mount with riser cable and hex screws.

Dual System Installation

Install ITX bracket, motherboard, and connect I/O for a dual system.

Front I;O Functionality

Details on front panel connectors like USB, audio, and buttons.

Hardware Installation

Motherboard Installation

Installing the motherboard using screws.

Power Supply Installation

Installing the power supply unit (PSU) with screws.

3.5 HDD Storage Installation

Mounting 3.5" HDDs using drive cages and screws.

2.5 SSD Storage Installation

Installing 2.5" SSDs using screws.

GPU Anti-Sag Bracket Installation

Attaching the GPU anti-sag bracket.

Cable Connections

Connecting front panel I/O cables to the motherboard.

D-RGB Lighting Setup

Connecting D-RGB components and syncing with the motherboard.