Phanteks ECLIPSE P350X - User Manual

ECLIPSE P350X / P360X FRONT I/O
ECLIPSE P350X / P360X FANS & RADIATORS CLEARANCES
PRODUCT OVERVIEW
ECLIPSE P350X / P360X
REAR
FRONT
TOP
120
FAN
140
FAN
140
FAN
120
FAN
120
FAN
140
RAD
120
RAD
120
RAD
120
RAD
CLEARANCE
CPU Cooler Height 160mm
PSU Clearance 250mm
GPU Clearance 400mm
E-ATX Motherboard 280mm
140
280
120
240
120
240
120
Max 122x315mm
*max motherboard compo-
nent height is 38mm
Max 142x315mm
Eclipse P350X Eclipse P360X
22x Motherboard
+ SSD Screw
1x Motherboard-
Stando
FRONT FILTER
TOP FILTER
PSU FILTER
2x Thumb Screw
4x PSU Screw
12x Fan Screw
1x This Manual
6x Zip Tie
120 mm Case Fan
(Pre-Installed)
2.5” SSD Bracket
(Pre-Installed)
INTRODUCTION INCLUDED ACCESSORIES
INSTALLATION GUIDE V1.0
Thank you for choosing Phanteks. Please take a moment
to carefully go through the manual. Phanteks will not take
responsibility for any damages incurred due to incorrect
installation or usage of this product.
1. Power Button
4. USB 3.0
2. Headphone
6. D-RGB Mode
5. D-RGB Color
3. Microphone
English
1. Power Button
2. Headphone
3. Microphone
4. USB 3.0
5. D-RGB Color
6. D-RGB Mode
Francais
1. Bouton d’alimentation
2. Casque
3. Microphone
4. USB 3.0
5. D-RGB Couleur
6. D-RGB Mode
Deutch
1. Ein-/Austaste
2. Kopfhörer
3. Mikrofon
4. USB 3.0
5. D-RGB Farbe
6. D-RGB Modus
Espanol
1. Botón de encendido
2. Auricular
3. Micrófono
4. USB 3.0
5. D-RGB Color
6. D-RGB mode

Phanteks ECLIPSE P350X Specifications

General

Case Type	Mid Tower
Motherboard Support	ATX, Micro-ATX, Mini-ITX
Color	Black
3.5" Drive Bays	2
2.5" Drive Bays	2
Expansion Slots	7
Maximum GPU Length	400 mm
Maximum CPU Cooler Height	160 mm
Front Radiator Support	Up to 360 mm
Top Radiator Support	Up to 240 mm
Rear Radiator Support	Up to 120 mm
Front Fan Support	3 x 120 mm or 2 x 140 mm
Top Fan Support	2 x 120 mm or 2 x 140 mm
Rear Fan Support	1 x 120 mm
Material	Steel, Tempered Glass
Front Panel I/O	2 x USB 3.0
Front Ports	2 x USB 3.0, 1 x Audio, 1 x Mic

Summary

Introduction and Product Overview

Included Accessories

Lists all accessories provided with the case, including fans, brackets, screws, and zip ties.

Front I;O Ports

Details the function of each port on the front panel of the Eclipse P350X/P360X chassis.

Fan and Radiator Clearances

Specifies maximum dimensions for fan and radiator installation in the chassis.

Panel Removal Procedures

Left Side Panel Removal

Steps to remove the left tempered glass panel by taking out its thumb screws.

Right Side Panel Removal

Steps to remove the right side panel by loosening thumb screws and sliding it off.

Front Panel Removal

Instructions to detach the front panel by pulling it from the lower section.

Hardware Installation Steps

Motherboard Installation

Guide to secure the motherboard inside the case using specific screws.

Power Supply Installation

Instructions for mounting the power supply unit with four screws.

2.5 SSD Mounting

Process for installing a 2.5-inch Solid State Drive using screws and grommets.

3.5 HDD Installation

Procedure for placing a 3.5-inch Hard Disk Drive into its designated bracket.

Cable Connections and RGB Control

Digital-RGB Product Connection

Guide for connecting digital-RGB products to the motherboard or controller.

Motherboard and Power Connections

Illustrates connections for motherboard power, HD audio, USB 3.0, and SATA power.

Vertical GPU Bracket Installation

Information on installing an optional vertical GPU bracket into the PCI slot area.

Integrated Digital-RGB Controller

Details on using the built-in controller for RGB modes, colors, and software control.