KeypadFunction:
Press to start measurement.
Up arrow / Parameters key. In the menu interface, press this button to toggle through the parameter
selections.
Down arrow / storage key. In the menu interface, press this button to scroll down through
parameter choices
Left arrow / graphic key. In the menu interface, press this button to change parameter selected.
The right arrow / Print button. When in menu, press this to scroll through parameter choices. In
the main interface, this can be used to send data to printer
Set / Menu button. In the main interface, press the button to display current set Parameters.
Press and hold for 3 seconds to enter the main menu interface.
Level Indicator. In main interface this allows you adjust the level of the stylus to the workpiece.
The arrow should be pointing at the zero before taking a test.
This is also the “Enter” button when in the menu interface.
To Next Page
Loading...