Copyright @ 2014 Phicomm Europe GmbH – print only for private use!
page 24 of 49
Menu item Explanation
Wireless Security Settings
Security Options
Disabled
WEP: Wired Equivalent Privacy
WPA-PSK: Pre-Shared Key of WPA
WPA2-PSK: Pre-Shared Key of WPA2
WPA/WPA2-PSK: automatically based on the wireless
stations’ capacity and request
Note
The security modes are different in the kind of encryption.
WEP encryption provides the least protection while WPA2-PSK is to
overcome the most difficult and therefore offers the best
protection.
Wireless MAC Filtering
Enter the MAC address. Set to block or allow the PC(s) to connect with the wireless
router. To set MAC addresses proceed as follows:
1. Select Enabled under Wireless MAC Filtering.
2. Select Blocked or Allowed under Filter Options.
3.
Fill 00:0A:EB:00:07:5F in Add MAC Address.
4. Click Add/Save button.
To Next Page
Loading...
