3
USB sync cable
Phone battery
Quick Start Guide
1.2 INSTALLING SIM CARD, BATTERY AND
STORAGE CARD
Make sure to always turn off the power before installing or
replacing the SIM card and battery. Also, remove the back
cover before you can install the SIM card, battery and storage
card.
REMOVE THE BACK COVER
1. Make sure your device is turned off.
2. Carefully hold the device with the front panel facing
down.
3. Hold the lower half of back cover up with your thumbs
or fingers. Remove it from the opening.
PUT THE BACK COVER BACK
1. First keep the upper half of the back cover fixed and
admit at the half opening of insertion unit.
2. Push the back cover into the fixed position from two
slides and lower half part.
SIM CARD
The SIM card includes your phone number, the service
information, the phone book and the message storage.
Install SIM Card
1. Make sure the phone is off.
2. With the SIM card’s gold contacts facing down and its
4
cut-off corner facing out, insert the SIM card into the
SIM card slot.
NOTICE: The phone is dual card dual-standby mobile
phone; two SIM cards can be installed at the same time.
The G card (GSM) only can be installed on the right, and
both G card (GSM) or W card (WCDMA/UMTS) can be
installed on the left.
REMOVE SIM CARD
1. Remove the back cover and battery.
2. Take out the SIM card.
BATTERY
Your device comes with a rechargeable Lithium-ion battery
and is designed to use only manufacturer-specified original
batteries and accessories. Battery performance depends on
many factors, including network configuration, signal strength,
phone operating ambient temperature, functions and settings
selected and used, items connected to the port, your sound,
data and other apps usage patterns. The new battery in the
phone is half charged. Please insert and charge the battery
before using.
Install battery
1. Align the battery’s exposed copper contacts with the
battery connectors inside the battery compartment.
To Next Page
Loading...
Need help?
General
