PHICOMM K3C User Manual

Phicomm K3C - AC1900 Smart Wi-Fi Router
5
1. Connect the power adapter into an electrical outlet, connect the other end to the
router, and turn on the router.
2. Connect your modem to the WAN port on the router using a RJ-45 cable.
Note
 Make sure your modem have properly internet connection.
 If you have a wired Ethernet connection to internet instead of a
modem, connect the RJ-45 cable directly to the WAN port on the
router, then continue with the following instructions to complete
the router setup.
3. Connect your device to the router (wired or wireless):
3-a. Wired connection:
Connect your PC to the LAN port on the router with a RJ-
45 cable.
3-b. Wireless connection:
Turn on WLAN on your wireless device and connect to
@PHICOMM_XX or @PHICOMM_XX_5G.
XX represents the last two digits of the router’s MAC address that can be found on the
label at the bottom of the router.

PHICOMM K3C Specifications

General

Brand	PHICOMM
Model	K3C
Category	Wireless Router
Language	English