PHICOMM K3C User Manual

Phicomm K3C - AC1900 Smart Wi-Fi Router
20
When UPnP is enabled, devices/applications may dynamically add themselves to a
network and be shown in the list without the need for user configuration.
Service Description
The description about the application that initiates the UPnP
request.
External Port
The port that the router opens for the application.
Internal Port
The port that the router opens for local host.
IP Address
The IP address of the local host that initiates the UPnP request.
UPnP Status
The status about whether the port of the UPnP device that
established a connection is currently active.
6.5 Port forwarding
Port forwarding opens a specific port to allow remote users to access certain public
services such as gaming, downloading, or web server on your local network.
To set up port forwarding on Phicomm router, follow these steps below:
1. On Web Management, go to Main menu > Advanced > Port Forwarding and
toggle on Port Forwarding switch.
2. Enter the service name or description in Rule Name, enter the LAN IP of the server,
specify port/port range for external port and internal port, and select the protocol.
3. Click Save to save the settings. You can also add another service by clicking .
When the configuration completes, the access to the server will be redirected to the
server IP address by using the WAN IP.

PHICOMM K3C Specifications

General

Brand	PHICOMM
Model	K3C
Category	Wireless Router
Language	English