PHICOMM K3C User Manual

Phicomm K3C - AC1900 Smart Wi-Fi Router
24
To enable Remote Access, follow these steps below:
1. On Web Management, go to Main menu > Advanced > Dynamic DNS and toggle
on Dynamic DNS switch.
2. Enter the IP address of the computer that is given the access.
Note
If you set Management IP as 255.255.255.255, all devices from the
network can remotely manage your router.
3. Click Save to save the settings.
To access the router from internet, type the router's WAN IP into the address bar of a

PHICOMM K3C Specifications

General

Brand	PHICOMM
Model	K3C
Category	Wireless Router
Language	English