Philips 190CW7CS/00 - Page 57

190CW7 LCD
57
14
22
GENERAL PRODUCT SPECIFICATION(Continued)
3.4 Horizontal scanning
Syncpolarity:Positiveor Negative
Scanningfrequency : 30 - 83 K Hz
3.5 Vertical scanning
Syncpolarity:Positiveor Negative
Scanningfrequency : 55 -75 Hz
3.6 Power input connection
Powercord length:1.8M
Powe
rcordtype :3leadspowercord with
protectiveearthplug.
3.7 Powermanagement
The monitormust comply with the MicrosoftOnNowspecification,with two powermanagement
states, as defined by t
he VESA DPMSdocument. The monitormust appropriately display the
DPMS state.
Mode HSYNCVSYN
C
Video Pwr-cons. Indi cation Rec.
time
Power-On On On active <36W(typ..)
34 W (typ.)
Green LED--
Off Off Off blanked <1W AmberLED<3s
DC Power
Off
N/A <1W LED Off
3.8 Display identification
In accordance withVESA Display Channel Standard Ver.1.0 and having DDC 2B capability
4Visual characteristics
4.4 Test condi tions
Unless otherwise specified, thisspecification is defined
under the foll
owingconditions.
(1)Input si gnal : As defined in 3.3, 1440 x 900
non-interlaced mode ( 56K/60Hz ),signal
sourcesmust have 75 ohm output impedance.
(2) Luminance setting:controls to be set to 300 nitswith
full screen 100 % duty cycle white si gn
al
(3) Warm up: morethan 30 minutesafterpower on withsignal supplied.
(4)Ambient light : 400 -- 600 lux.
(5)Ambient temperature :20± 5 °C
4.5 Brightness
> 300 nits (at panelcolor temperature,at center of the screen,set c
ontrast
and brightness at maximum. )
8639 000 17256
2006-06-22
2006-06-22
590
BRAND:PHILIPS
19 inch TFT WXGA LCD Monitor
TYPE : 190CW7CS/00