Philips 190CW8FB/00 - Page 71

HUDSON 8
15
71
Quality Inspection specification:
CIE coordinates
(x,y)
9300K x = 0.283 ± 0.015
y = 0.297
± 0.015
6500K/sRGB x = 0.313 ± 0.015
y = 0.329
± 0.015
sRGB x = 0.313 ± 0.015
y = 0.329
± 0.015
5.0 Mechanical characteristics
5.1 Controls
Front. :
DC power switch
OSD function key
UP/DOWN (Brightness key)
LEFT/RIGHT
Auto key
Rear.:
Video signal connector
DVI signal connector
Power cord socke t
5.2 Unit dimension / Weight
Set dimension (incl. pedestal). : 375(W) * 431(H) * 210(D) mm
Net weight. :
5.3 Tilt and swivel base
Basic base:
Tilt angle: -5 ° +2/- 0 ° (forward)
+20 °+3/- 0 ° (backward)
Swivel rotation:
5.4 Transportation packages
5.4.1 Shipping dimension/Weight
Carton dimension. : 407(W) * 460(H) * 114(H) mm
Gross weight. :
5.4.2 Block unit / Palletization
Basic Base:
layers / block
sets/layer sets/block unit
20/19 6/6 120/114
Blocks/container
20 feet 40 feet
9/2 20/2
6.0 Environmental characteristics
The following sections define the interference and susceptibility condition limits that might occur
between external environment and the display device.
6.1 Susceptibility of display to external environment
Operating
- Temperature : 0 to 40 degree C
- Humidity : 80% max
- Altitude : 0-3658m
- Air pressure : 600-1100 mBAR
Storage
- Temperature : -20 to 60 degree C
- Humidity : 95% max
- Altitude : 0-12192m
- Air pressure : 300-1100 mBAR
BRAND : PHILIPS
19 inch LCD Monitor
TYPE :190CW8
2007-08-01
590
2007-08-01
GENERAL PRODUCT SPECIFICATION(Continued)