Philips 22HFL3331D/10 - Start a TV DEMO; Reset the TV to Factory Settings

20 EN
Start a TV DEMO
Note
Before starting DEMO, make sure to activate one
of the following setting for TV DEMO to take effect:
1. [PBS settings] > [PBS mode] > [Off].
2. [PBS settings] > [Applications] > [Signage].
1 Press Red button (DEMO) on the
remote control.
2 Press to select a demo and press OK
to view it.
3 Press Red button (DEMO) to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. Channel installation settings
remain the same.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Factory settings].
3 Press OK or to enter the [Factory
settings] menu.
A factory setting message appears. »
4 Select [Reset] to start resetting.
5 Press EXIT to exit.
Downloaded From TV-Manual.com Manuals