12
Switch your TV to standby
• Press (Standby-On) on the remote
control again.
» The remote control sensor on the TV
switches to red.
Switch your TV off
• Press the power switch on the TV again.
» The remote control sensor on the TV
switches off.
» Though the TV consumes very little
power when in standby, energy
continues to be consumed. When not
in use for an extended period of time,
disconnect the TV power cable from
the power outlet or turn off the power
switch.
Note
•
If you cannot locate your remote control and want
to switch on the TV from standby, press P/CH +/- on
the TV.
4 Use your TV
This section helps you perform basic TV
operations.
Switch your TV on
• Press the power switch on the TV.
» There is a short delay before the TV
responds.
If the TV is in standby
• Press (Standby-On) on the remote
control.
EN
To Next Page
Loading...
