34
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Use one-touch play
1 The rst time you use one-touch play:
Press
, then select [Setup] > [TV
settings] > [EasyLink] > [On].
2 Press play on your device.
» The TV automatically switches to the
correct source.
Use one-touch standby
When you press on the TV remote control,
the TV and all HDMI-CEC compliant devices
switch to standby mode.
1 The rst time you use one-touch standby:
Press
, then select [Setup] > [TV
settings] > [EasyLink] > [On].
2 Press (Standby-On) on the TV’s or
device’s remote control.
» The TV and all connected HDMI
devices switch to standby.
EN
To Next Page
Loading...
