Philips 248C3LSB/00(AP) - DDC Connection and Data; DDC Connection and Mains Cord Setup; D-Sub Connector Pin Assignments; Display Port Connector Pin Assignments

22 248C3L LCD
DDC Instructions
5. Connect and Mains cord to Monitor as shown in Fig.2.
Fig.2
Pin assignments :
A. 15-pin D-Sub Connector
B. Input Display Port Connector pin
Pin Signal Assignment Pin Signal Assignment
1 Lane0 P 11
Ground
2 Ground 12
Lane3 N
3 Lane0 N 13 Ground
4 Lane1 P 14 EDID WP
5 Ground 15 AUX_CH P
6 Lane1 N 16 Ground
7 Lane2 P 17 AUX_CH N
8 Ground 18
Hot Plug Detect
9 Lane2 N 19
Return
10
Lane3 P
20
DP_PWR
PIN No. SIGNAL PIN No. SIGNAL
1 Red 9 DDC +3.3V or +5V
2 Green/ SOG 10 Logic GND
3 Blue 11 Sense (GND)
4 Sense (GND) 12 Bi-directional data
5 Cable Detect (GND) 13 H/H+V sync
6 Red GND 14 V-sync
7 Green GND 15 Data clock
8 Blue GND
ʳʳ