Philips 248C3LSB/00(AP) - General Product Specification (Modes & OSD); OSD and Keypad Functions

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
0.1 248C3 23.6” Wide 16:9 LCD Monitor
2011/05/02 PHILIPS 9 of 18
248C3L LCD 53
General Product Specification
3.2.1 Mode storing capacity
Factory preset modes : Refer to Timing table
preset modes : Refer to Timing table
User modes : Refer to Timing table
Timing pixel clock over H/W limitation do not support.
1. Factory preset modes and preset modes are defined in the enclosed timing table file
˅ˇˋ˖ˆ˟ʻ˛ʼʳ˧˼˼˺ʳ
˧˴˵˿˸
3.3 OSD/Keypad functions
ITEM
1 OSD/keypad definition
ˠˆʳˢ˦˗ʳ˕ʳ
˷˸˹˼˼˼
Reset -
No : Exit
Yes : Auto adjustment for
displaying timing mode and recall
factory preset
2 OSD Translation
˯ˢ˦˗˲˦˼˺˲ˠˆ
8 LANGUAGES, w/o Turkish.
3 Power On logo
ˣ˻˼˿˼˲˟˺˲˄ˌ˅˃
˄˃ˋ˃ˁ˵
Power On Logo:
Power On Show up Philips logo
3 seconds
Æ Change to input signal.
This picture is reference only.
The official drawing will send out
by PM.