Philips 24PFL3603 - Picture Settings

PICTURE
1
Press  and use  to select PICTURE, then press OK.
PICTURE PICTURE
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Advanced Settings
Standard
Normal
Move Move
Select Select
Adjust Adjust
Back Back
2
Use  to select the item you want to adjust, then press
OK.
Picture Mode
To select the desired setting, then press OK.
(Standard, Dynamic, Soft or User)
The brightness, contrast, color, tint and
sharpness are only available in User mode.

 Cursor Cursor 
Brightness
To decrease
brightness
To increase brightness
Contrast To decrease contrast To increase contrast
Color
To decrease color
intensity
To increase color
intensity
Tint To add red To add green
Sharpness To soften To sharpen
Color Temperature
To set the picture color temperature to Normal,
Warm and Cool.
Increase or reduce warm color of the picture
personally (red), and the cool color personally
(blue).
Advanced Settings
To select the desired setting, then press OK.
(Format, Noise Reduction, Dynamic Contrast,
HDMI Mode and 120 PMR)
Ɣ
You can set a particular picture quality using Advanced
Settings.
Advanced Settings
Format
Noise Reduction
Dynamic Contrast
HDMI Mode
120 PMR
Wide
Middle
Off
Auto
Off
Move
Select
Adjust
Back
Format
Changing picture format p.18
Noise Reduction
To select the desired setting, then press OK.
(Off, Low, Middle or High)
Dynamic Contrast
Off To set Dynamic Contrast to Off
On
To enhance contrast in an image
automatically
HDMI Mode
Auto
Automatic recognize the original
input signal
Video
Set the output image to video
mode
Graphic
Set the output image to graphic
mode
120 PMR
Off To set 120 PMR to Off
On
To make the video appear
smoother
21 .English
Continued on next page.