Over Scan
1
Use to select Over Scan, then use to select the item.
Off To set Over Scan to Off
On To set Over Scan to On
Source Label
Create labels for the devices connected to your TV.
1
Use to select Source Label, then press OK.
2
Use to select the source and use to select Default /
Antenna / Cable / Satellite / DTV / DVD / Blu-ray / HD-DVD /
XBOX / Wii / PS3 / Game / Computer / VCR / DV / Custom.
Source Label
TV
Video
HDMI1
HDMI2
MULTIMEDIA
Default
Default
Default
Default
Default
Move
Select
Adjust
Back
Other Settings
Set the parameter of audio only, no signal power off and no operation
power off.
1
Use to select Other Settings, then press OK.
2
Adjust the following items.
Audio Only
Play the audio with the picture turned off.
Off To set Audio Only to Off
On
When you turn the Audio Only on and exit the
OSD menu, the panel will be dark, and then
press any key to exit the Audio Only status.
Restore Default
Change power on options or reset TV to factory default.
1
Use to select Restore Default, then press OK.
2
Use to select Yes, then press OK.
Setup Wizard
Set the first time installation.
1
Use to select Setup Wizard, then press OK.
Ɣ
Only at TV source, the selection is displayed.
Ɣ
For detail please refer to Setup wizard p.15.
30 .English
Continued on next page.
To Next Page
Loading...
