CEC
This function allows you to operate the linked functions between our
brand devices with a HDMI-CEC feature and this unit connecting
through an HDMI cable. You must connect this unit to our brand
HDMI-CEC devices and be sure it's HDMI-CEC setting is also set to
On.
1
Use to select CEC, then press OK.
CEC
CEC Control
Device Auto Power Off
TV Auto Power On
Audio Receiver
Device Lists
Connect
On
Off
Off
Off
Adjust Back
2
Use to select the item you want to adjust, then use to
adjust it.
Set the CEC Control to On or Off. The following additional settings will
be grayed out when you set them to Off.
CEC Control
Off Disables all HDMI-CEC.
On
Selects if you have connected an
external device that is compatible
with the HDMI-CEC function.
You can set your connected HDMI-CEC device to turn off by
interlocking from this unit’s power.
Device Auto
Power Off
Off
Your connected HDMI-CEC device
stays on even if the unit goes into
standby mode.
On
Your connected HDMI-CEC device
turns off automatically when the unit
goes into standby mode.
This unit will turn on when the power on signal is sent from your
connected HDMI-CEC device.
TV Auto Power
On
Off
This unit stays in standby mode even
if you turn on your connected HDMI-
CEC device.
On
This unit turns on automatically
when you turn on your connected
HDMI-CEC device.
Audio receiver allows you to use CEC to output TV audio directly to a
connected audio device, without the need for an additional digital
audio cable. only HDMI 1 mode has the audio receiver function.
Audio Receiver
Off Disable HDMI-audio receiver.
On
You can output TV audio through the
HDMI cable solely, provided both
the TV and device are HDMI-audio
receiver compliant.
Note(s)
Ɣ
Some set-top boxes are not compatible with CEC, this is not a malfunction.
Device Lists
Show the device list menu.
1
Use to select Device Lists, then press OK to enter the sub-
menu.
Connect
Connect the selected HDMI-CEC device.
1
Use to select Connect, then press OK to enter the sub-menu.
Voice Guidance
Lets you configure voice guide and its settings.
1
Use to select Voice Guidance, then press OK.
2
Use to select the item you want to adjust, then use to
adjust it.
Voice Guidance
Off To set Voice Guidance to Off
On To set Voice Guidance to On
Volume
High
Set voice guide volume based on
your preference
Middle
Low
Speed
Fast
Set voice guide speed based on
your preference
Normal
Slow
Pitch
High
Set voice guide pitch based on
your preference
Middle
Low
Video Description
Change from the main audio to the secondary audio stream that
contains video description,and vice versa.
1
Use to select Video Description, then use to select the
item.
Off To set Video Description to Off
On To set Video Description to On
E-sticker
E-sticker (Electronic Sticker) is displayed. E-sticker can be turned off
using procedure below.
1
Use to select E-sticker.
2
Use to select Off.
Off You can turn off E-sticker.
On E-sticker is displayed of the TV screen.
31 .English
Continued on next page.
To Next Page
Loading...
